917357716333 917357716333

Eco Plast Ready Mix Plaster

Eco Plast Ready Mix Plaster
Business Type Trader
Ecoplast Properties Typical Values at 300 C
Appearance Grey Granular Powder
Main Binder PPC (Portland Pozzolana Cement)
Click to view more

Preferred Buyer From

Location India ( Rajasthan)

Product Details

Graded Sand (Till 3mm)
Application Thickness
6-30 mm In Single Layer
Water Requirement
12-13% As Per Weight
Setting Time
2 Hours
Water Curing
Almost No Curing
0.17/kg.sq.ft./mm On Brick Wall, 0.13/kg.sq.ft./mm On AAC Block Wall
Compressive Strength
> 5Mpa At 7 Days

Plaster Masters Ecoplast is cement-based quality material composed of hydraulic binders, high-quality graded sand, and special additives.  It is supplied as dry powder in pre-weighed bags ready to use on site, which requires only the addition of clean water to produce cohesive mortar, it contains special additives to provide good adhesion and shrinkage control.


Plaster Masters Ecoplast is used for masonry, civil repair, plastering on inner and outer walls.  It can be used on brick, block, stone walls as well as concrete surface.



  • Consistent quality
  • Easy to carry, use and apply
  • Fixed mortar ratio
  • Minimum rebound losses
  • Almost no curing
  • Reduced shrinkage cracks
  • Time-saving
  • Durable, smooth & excellent finish




The surface should be clean, sound and free from loose material, grease, oil paint etc.  Prior to Plaster Masters Ecoplast application, soak the entire surface with clean water.



Mix Plaster Masters Ecoplast with 12-13 % water by weight of the material.  Stir for 2-3 min, to have a consistency free of lumps.



Plaster Masters Ecoplast can be applied by normal masons just like the conventional method.



In general, no curing is required for Plaster Masters Ecoplast.  However, when the ambient temperature crosses 30 degrees centigrade, it is recommended to do one curing after 24 hours in order to minimize the rapid evaporation of water from the applied surface.



40kgs PP bags. The product should be stored in cool and dry place, and to be used within 6 months from date of manufacturing.



Use of dust mask, safety goggles and gloves are recommended.


Yes! I am interested


Points Ready Mix Plaster Conventional Mortar
Raw Material(Sand & Cement) Consistent quality Inconsistent quality
Mixing Ratio (Sand & Cement) Fixed Will always very at different times
Finish Smooth Rough
Wastage Minimum wastage(3-5%) Heavy wastage in shifting, sieving of raw material & application of plaster (15-20%)
Consumption 0.17/kg.sq.ft./mm on brick wall, 0.13/kg.sq.ft./mm on AAC block wall 0.35/kg.sq.ft.mm
Curing Almost no curing (only 1 curing required after 24 hours of plastering) Extensive curing required
Cracks Negligible shrinkage cracks Shrinkage cracks are observed
Manpower Less as ready to use mortar & almost no curing Practically higher for raw material processing application & curing
Edges Sharp edges possible Sharp edges not possible
Space Constraint Easy to carry in narrow streets, plastering can be done very conveniently in any circumstances/weather Separate space needed for keeping sand & cement
Stocktaking Easy to count & reconcile as available in bags Very difficult
Paint Finish Quality and life of paints are enhanced Average & inconsistent
Quality Consistent Irregular

Looking for "Eco Plast Ready Mix Plaster" ?

Explore More Products