917357716333 917357716333

Silico Plast Ready Mix Plaster

Silico Plast Ready Mix Plaster
Business Type Trader
Ready Mix Plaster Typical Values At 30 Degree C
Appearance Grey Granular Powder
Main Binder PPC (Portland Pozzolana Cement)
Click to view more

Preferred Buyer From

Location India ( Rajasthan)

Product Details

Graded Sand (Till 3mm)
Application Thickness
6-30 mm In Single Layer
Water Requirement
12-13% As Per Weight
Setting Time
2 Hours
Water Curing
Almost No Curing
0.17/kg.sq.ft./mm On Brick Wall, 0.13/kg.sq.ft./mm On AAC Block Wall
Compressive Strength
> 5Mpa At 7 Days

SILICO READY MIX PLASTER is a polymer-modified premixed cement-based plaster. It is convenient, easy to use, strong and binds better to its substrate. It provides an even surface on which tiling can be done faster & efficiently. READY-MIX PLASTER is specially formulated using graded sand to impart compactness to the plaster. It also contains special polymers which reduce re-bonding losses, thereby increasing the productivity of the labor and has a water-retaining component which reduces the curing requirement of the plaster, when compared to the conventional method.



Consistent quality

  • Easy to carry, use and apply
  • Fixed mortar ratio
  • Minimum rebound losses
  • Almost no curing
  • Reduced shrinkage cracks
  • Time-saving
  • Durable, smooth & excellent finish


Ready Mix Plaster

Ready Mix Plaster is cement-based quality material composed of hydraulic binders, high-quality graded sand, and special additives. It is supplied as dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce cohesive mortar, it contains special additives to provide good adhesion and shrinkage control.


Ready Mix Plaster is used for masonry, civil repair, plastering on inner and outer walls.  It can be used on brick, block, stone walls as well as concrete surfaces.




Surface should be clean, sound and free from loose material, grease, oil paint etc.  Prior to Ready Mix Plaster application, soak the entire surface with clean water.



Ready Mix Plasters with 12-13 % water by weight of the material.  Stir for 2-3 min, to have a consistency free of lumps.



Ready Mix Plaster can be applied by normal masons just like the conventional method.



In general, no curing is required for Ready Mix Plaster.  However, when the ambient temperature crosses 30 degrees centigrade, it is recommended to do one curing after 24 hours in order to minimize the rapid evaporation of water from applied surface.



40kgs PP bags. The product should be stored in cool and dry place, and to be used within 6 months from date of manufacturing.



Use of dust mask, safety goggles and gloves are recommended.


Yes! I am interested


Points Ready Mix Plaster Conventional Mortar
Raw Material(Sand & Cement) Consistent quality Inconsistent quality
Mixing Ratio (Sand & Cement) Fixed Will always very at different times
Finish Smooth Rough
Wastage Minimum wastage(3-5%) Heavy wastage in shifting, sieving of raw material & application of plaster (15-20%)
Consumption 0.17/kg.sq.ft./mm on brick wall, 0.13/kg.sq.ft./mm on AAC block wall 0.35/kg.sq.ft.mm
Curing Almost no curing (only 1 curing required after 24 hours of plastering) Extensive curing required
Cracks Negligible shrinkage cracks Shrinkage cracks are observed
Manpower Less as ready to use mortar & almost no curing Practically higher for raw material processing application & curing
Edges Sharp edges possible Sharp edges not possible
Space Constraint Easy to carry in narrow streets, plastering can be done very conveniently in any circumstances/weather Separate space needed for keeping sand & cement
Stock taking Easy to count & reconcile as available in bags Very difficult
Paint Finish Quality and life of paints are enhanced Average & inconsistent
Quality Consistent Irregular

Looking for "Silico Plast Ready Mix Plaster" ?

Explore More Products